Set shower shower installation four points must pay attention

    The newly bought showers are basically rigorously tested, as long as they are purchased in regular stores, there will be no problem. Especially in the Taobao purchase can be more assured. Because Taobao officially strictly controls the quality of goods on the shelves, once Taobao will make the business will be self-sufficient. In this way, friends who need to decorate and buy showers can be assured of bold online shopping showers. Mainly for everyone to talk about the precautions when installing a shower.

    One of the four points of the set shower shower installation must be noted: internal inspection

The mixing valve faucets are connected together, which is the device that comes out with cold water and hot water. The ratio of hot and cold water can be adjusted. To meet the body's temperature needs. When installing this part, we should carefully check the faucet for any dirty water, debris, sand, impurities and the like. Avoid remaining in the inside, long-term will affect the life of the shower, especially the damage to the spool inside the faucet, it may also block the starting block on the faucet. Therefore, these impurities must be cleaned before installation. Keep the inside of the faucet mixing valve clean.

    Set the shower set to four points to pay attention to the second: cleaning the surface

    The surface of the faucet needs to be scrubbed regularly with detergent to remove stains. The surface of the faucet can be rinsed once with clean water before cleaning. Dry the shower with a soft cotton cloth. Then use a neutral detergent to gently wipe. Keep the shower surface clean. Do not use a clean ball of plastic brush or a hard cloth to scrub the shower to prevent the surface from being scratched. Most of the showers on the market today are made of pure copper. Most afraid of encountering acidic substances. So avoid using acidic detergents. It is best to use neutral, general supermarkets have sales.

    Set the shower shower installation four points to pay attention to: cleaning the filter

    There is a mesh on the mouth of the shower faucet that is the filter. The filter can be removed first by means of a tool and then the filter is rinsed with water. It is best to have a high water pressure. Be sure to clean the mesh. You can use a brush or a toothbrush to gently scrub. You can consider replacing the filter and modifying a water saving valve. It is very convenient to use, just press the protrusion of the faucet to switch the water flow, which is very convenient and saves water.

    Four sets of shower shower installation must pay attention to four: water saving device adjustment

    Today's showers are generally equipped with water-saving features. If your faucet does not have a water saving device, consider installing a water saving valve on the faucet. Save 45% on your water. It is also very convenient to use. If there is a water-saving device, it is usually a threaded interface at the bottom of the shower column. This place is equipped with a water saving device. When the water pressure is less than eight kilograms, the water output of the shower will always remain at about eight liters. Under two kilograms of water pressure, the water output per minute can reach four liters. The higher the water pressure, the better the water saving. If the floor of the home is high and the water pressure is too low, possibly less than one kilogram, the water saver can be removed from the thread at the bottom of the shower. This way there is no water saving function. The water flow will increase a lot.

    Summary of the small series: The above are some precautions for the installation of the shower. Many friends don't really understand the knowledge of these showers. They may only pay attention to what brand of showers. After buying it, I didn't pay attention to these places, ignoring the influence of these details on the use of showers, resulting in a lot of final problems.